3DFX Voodoo5 5500 & ASRock 4CoreDual-Sata2 New Experiment!

Aperto da ciacara, 03 Aprile 2011, 17:03:27

Discussione precedente - Discussione successiva

0 Utenti e 1 Visitatore stanno visualizzando questa discussione.

ciacara

Aggiungo i Link diretti alle ultime Modifiche effettuate al Thread:
I add the direct links to the latest changes made to the thread:
19/10/2019
3Dfx 3DMark Benchmark
[/SIZE][/URL][/COLOR][/U][/B]

...To be Continue!

Ciao a tutti,
da questa promessa ripartiamo con un nuovo Esperimento!:okduo:
Dopo ripetuti fallimenti son riuscito a trovare il giusto equilibrio e le giuste modifiche Hardware per installare e rendere funzionale una Voodoo 5 5500 Agp standard su un' ASRock 4CoreDual-Sata2 con un Q6600.
 
Materiale necessario per la modifica:
1. N°1 Trimmer Multigiri da 20Kohm per VAGP
2. N°1 Trimmer Multigiri da 22Kohm per VTT
3. N°1 Trimmer Multigiri da 10Kohm per Riser Agp
4. N°1 Riser AGP Universale Costronic
5. N°1 Mollex Femmina per Riser Agp
6. N°1 Mollex Maschio per v.3,30 Sata
7. N°1 Micro Interruttore On/Off
8. Saldatore a Punta Fine da 25w
9. Cm 15 di Filo Rivestito Bianco e Nero da 0.5mm
10. Pistola per Colla a Caldo
 
Modifica Scheda Madre:

Per la Mobo andremo a modificare il Voltaggio delle resistenze :
1. Vagp/Vnb = R2471 con SMD da 10 Kohm
2. Vtt/CPU = R2469 con SMD da 15 Kohm
 
La Vmod alla Scheda Madre serve per far riconoscere la Voodoo5 5500.
Con 1.62v originali la Voodoo5 5500 non si avvia.
Con 1,88v la voodoo si avvia, viene attivato l' agp@4x ed il boot iniziale della Scheda madre è Stabile.
E solo dopo avere ottenuto questi risultati si può usare il Riser AGP Universale Vmod.

Hello everyone,
share it with the promise of a new Experiment :okduo:
After repeated failures, I managed to find the right balance and the right changes hardware to install and make functional a Voodoo 5 5500 Agp standard on a normal 'ASRock 4CoreDual-Sata2 with Q6600.

Materials required for change:
1. N° 1 Trimmer from 20 Kohm for VAGP/VNB
2. N° 1 Trimmer from 22 Kohm for VTT
3. N° 1 Trimmer from 10 Kohm for AGP Riser
4. N° 1 Universal AGP Riser Costronic
5. N° 1 Female Mollex for AGP Riser
6. N° 1 Male Mollex for v.3, 30 Sata
7. N° 1 Micro On / Off Switch
8. Solder Pointed to 25w
9. 15 Cm of Black & White Coated Wire 0.5mm
10. Hot glue gun

Modder Motherboard:
 
For the Mobo we're going to change the Voltage resistance:
1. Vagp / VNB = R2471 with 10 Kohm SMD
2. Vtt / CPU = R2469 with 15 Kohm SMD
The Vmod to the Motherboard and to recognize the Voodoo5 5500 and get it started.
With the original 1.62v Voodoo5 5500 does not start.
With the voodoo5 5500 start v 1.88, is activated agp@4x and the initial booting of the motherboard is Stable.
And only after getting these results, it can use the Universal AGP Riser Vmod.




Prima della Saldatura, prepariamo il Trimmer da 20k regolandolo a 11k in modo da non influire sul voltaggio effettivo dell' AGP.
Stessa cosa con il Trimmer da 22K, regoliamolo a 16K in modo da non influire sul voltaggio effettivo del VTT.
Il Trimmer da 20k va abbinato all'Interruttore On/Off per poter "Spegnere" la Vmod dell'Agp e del Nort Bridge quando non viene utilizzata.
Purtroppo, durante le svariate "Prove" , ho saldato un trimmer di 10k al posto del 22k...:wall:
Vmod Old con Trimmer VTT da 10k e SMD 2469:

Before the Welding, we prepare the from 20k trimmer set to 11k so as not toaffect the effective voltage of ' AGP.
Same thing with the 22K Trimmer, set to 16K so as not to affect the effective voltage of the VTT.
The from 20k trimmer to be combined with' On / Off to "Switch" Vmod  Agp and Bridge Nort when not in use.
Unfortunately, during the various "Test", I welded a trimmer 10k instead of 22k ...:wall:
Old Vmod with a 10k Trimmer and SMD 2469:



 
Vmod New e Definitiva: :okduo:
Vmod New and Final: :okduo:





Per bloccare il tutto ho usato la Colla a Caldo.;)
La Resistenza SMD da 15k del R2469 si è dissaldata durante le svariate "prove"...:wall:
La Vmod del VTT funziona comunque...anche se, per motivi di sicurezza, è sempre meglio lasciare le SMD saldate, onde evitare dei danni alla Mobo in caso di Overvolt dato erroneamente con il Trimmer della Modifica.

Regolazione Voltaggi:
 
Installate sulla Mobo "solo" la Cpu/Dissipatore, la Ram e collegatela all'Alimentatore.
Avviate la Scheda Madre e procedete con le Regolazioni.
Abbassate il valore del Trimmer VAgp con il Micro Interruttore impostato su ON per aumentare il Voltaggio:
Prestate "molta" attenzione ai Punti di Misurazione, potreste causare dei danni alla Mobo.

Regolazione VAgp:

1. VAgp a v. 1,88/1,87

To block all I used the Hot Glue .;)
The SMD resistor 15k of R2469 and desoldering during various "Test"...:wall:
The Vmod VTT still works ... although, for security reasons, is always best to leave the SMD solder, to avoid damage to the Mobo for Overvolt because it incorrectly by Change the trimmer.

Adjustments of voltages:

Installed on the Mobo "only" to CPU , the Ram and connect to ' power.
Start the Motherboard and proceed with the Settings.
Lower the value of the Trimmers VAgp with the Micro Switch ON to increase the Voltage:
Be "attention" to measuring points, you could cause damage to the mobo.

Set the VAgp:

1. VAgp to see 1.88 / 1.87



 
Impostate il Micro Interruttore su OFF e misurate il Voltaggio:
Set the Micro Switch OFF and measure Voltage:


 
Il v. 1,62 è il voltaggio reale dell'Agp senza Vmod.

Regolazione Vtt:

2. Vtt a v. 1,38/1,37

v. 1.62 is the voltage of the real 'no AGP Vmod.

Set the VTT:

2. VTT 1.38 / 1.37




Inizialmente la Vmod era dedicata esclusivamente all'Agp.
In un secondo momento, per problemi di Corruzione Dati durante il caricamento/esecuzione del sistema operativo, è stata estesa anche al Vtt Cpu.

Riser Universale AGP:

Per evitare eventuali Modifiche alle Voodoo, ho deciso di creare un Riser Agp Autoalimentato.
Prima di procedere alla saldatura, dobbiamo identificare il Pin A34 del Riser AGP Universale:

Initially, the Vmod was dedicated only to 'Agp .
In a second step, for problems of DataCorruption when loading/execution of the operating system, has been extended to CPUVTT.

Universal AGP Riser:

To avoid any Changes to the Voodoo, I decided to create a AGP Riser Self-powered.
Before proceeding with the welding, we identify the Pin A34 Universal AGP Riser:




Prepariamo il Trimmer da 10k regolandolo a 5k e procediamo con la Saldatura:
Prepare the Trimmers 10k set to 5k and proceed with the Welding:





Anche questa volta ho usato la Colla a Caldo per fermare/bloccare il Trimmer e l'attacco Mollex Femmina sul Riser Agp Universale.;)
Installiamo il Riser sulla Mobo:
Also this time I used the Hot Glue to stop/block trimmer and the attack on MollexFemale Universal AGP Riser.;)
Install the Riser on Mobo:





Proviamo il Riser AGP sulla Voodoo5 5500:
We try AGP Riser on Voodoo5 5500:




Installiamo la Voodoo5 5500 sulla Mobo:
Install the Voodoo5 5500 on Mobo:




Dopo aver provato il tutto, possiamo installare la Scheda Madre nel Case, installare la Voodoo5 5500 e collegare l'alimentazione dei v.3,30 al Riser Agp:
After trying everything, we can install the Motherboard Case, install Voodoo5 5500 and plug in the power of the AGP Riser to v.3.30:




I v.3,30 dovete recuperarli da un cavo di alimentazione Sata dell'Alimentatore del case ed installarci un Mollex Maschio:
The v.3, 30 you have to recover from a cable Sata Power Supply of the case and install a Mollex Male:




Avviate il PC e godetevi lo Spettacolo!:okduo:
Start the PC and enjoy the Show!
:okduo:
 
Video

Video Trailer Inedito: :ok:
Video Unpublished Trailer:
:ok:



Video Trailer che mostra anche la parte Hardware modificata. ;)
Videos Trailer also shows that the part hardware modifier. ;)




 
Video Test Definitivo in HD (3 Parti):
Final Test Video HD (3 Parts):
 
3DFX Voodoo5 5500 Riser Agp @4x Vmod & Asrock 4CoreDual Sata2 Vmod - Part 1

 


3DFX Voodoo5 5500 Riser Agp @4x Vmod & Asrock 4CoreDual Sata2 Vmod - Part 2



3DFX Voodoo5 5500 Riser Agp @4x Vmod & Asrock 4CoreDual Sata2 Vmod - Part 3



...attenzione, l'Occhio Voodoo vi controlla...;)
...attention, the 'Voodoo Eyes "controls all...;)


Ancora una volta mi scuso per la prolungata assenza dal forum e le mancate risposte.
Son cambiate tante cose nella mia vita e non basterebbero 10 thread per descriverle...comunque arieccomi... ;)
Ringrazio tutta la comunità di Forumzone e di 3dfxzone per avermi trasmesso le conoscenze necessarie a compiere questo ennesimo Esperimento perfettamente riuscito!:okduo:
Grazie di Cuore a TUTTI!:app:
Un saluto e restate online... ;)
 
Ciao.

Francesco D. :lens:


Once again I apologize for the prolonged absence from the forum and the non-response.:)
Have changed many things in my life and would not be enough to describe 10 threads, I am still here ... ;)
I thank all the community of Forumzone and 3dfxzone for conveying to me the knowledge necessary to make this another Experiment a complete success!:okduo:
Thank you to all! :app:
Greetings and stay online ... ;)
Bye.

(Google & Francesco Translator :wall: :D)
Francesco D. :lens:


.

goriath

#1
Il video è fatto molto bene ;)

Attendiamo con molto interesse le novità!


EDIT: Un lavoro eccezionale, davvero complimentoni ;)
OLD SCHOOL: Because it was done right the first time
/!\\ PM box piena: per contattarmi inviatemi una mail

mikepedo

Since December 15, 2000 without 3dfx.
gone but never forgotten

PhilAnselmo@Superjoint

Oh bene, un altro prode combattente è tornato!

Lunga vita a 3dfx! ;)
PC1:E5200@3.6 - P5Q-SE - 2x2pc6400 - RadeonHD4850 - Seagate500gbSata2
PC2: AthlonXP2000+ - MSI KT3Ultra - 2X512HyperX - 3DFX Voodoo5 5500 - Maxtor60GB

maverick85

Complimenti per la tenacia e sopratutto per i risultati :)

peppos83

HD3850 - V5 5500pci (Tnx Amigamerlin) - SIS Mirage Graphics Sfidatemi :kazim:

radu14m


predator87


mikepedo

La mia ASRock Conroe 865PE è in attesa dell'invervento... :okduo:
Since December 15, 2000 without 3dfx.
gone but never forgotten

ciacara

#9
Questo post è dedicato ai vari Benchmark con 3DMark che eseguirò con questa configurazione.
Userò uno schema già visto e usato in altri Thread ed altri Forum per rendere compatibile e confrontabile con altri User i nostri risultati.
This post is dedicated to various Benchmarks with 3DMark that I will run with this configuration.
I will use a scheme already seen and used in other Threads and other Forums to make our results compatible and comparable with other Users.


Schema:
Scheme:
Citazione
Score | CPU Score | Color Depth | 3dfx Voodoo |      CPU       | Chipset |    OS   |  Graphics Driver  |   User


Esempio:
Example:
Citazione3DMark99Max 640x480

1000  |    1000     |      16 Bit    |     V4 4500    | P4 2.0 Ghz |   I850   | W98Se | Amigamerlin 2.0 |   ciacara


Link diretto al sito UL-Benchmark e Risoluzioni consentite:
Direct link to the site UL-Benchmark and Resolutions allowed:

3DMark 99 Max
Use this key and username to unlock the full version.
78TR2-8DBDU-BMXXS    user: Futuremark

640x480 16bit - 800x600 16bit - 1024x768 16bit

3DMark 2000
Use this key and username to unlock the full version.
6VZTY-SDZ75-KA9V7    user: Futuremark

640x480 16bit - 800x600 16bit - 1024x768 16bit

3DMark 2001SE
Use this key to unlock the full version.
7QMF2-TSLJR-ESRDD-L3FJF

640x480 16bit - 800x600 16bit - 1024x768 16bit



3DMark99Max 640x480
Score___CPU Score__Color Depth___3dfx Voodoo____Cpu Series______Chipset______OS_____GraphicsDriver____User

23777_|__87202__|___16bit___|_V5 5500@190_|_QX6800@3.33_|_PT880P/U_|_WinME_|_Amigamerlin 2.9_|_ciacara




3DMark99Max 800x600
Score___CPU Score__Color Depth___3dfx Voodoo____Cpu Series______Chipset______OS_____GraphicsDriver____User

17797_|__87110__|___16bit___|_V5 5500@190_|_QX6800@3.33_|_PT880P/U_|_WinME_|_Amigamerlin 2.9_|_ciacara




3DMark99Max 1024x768
Score___CPU Score__Color Depth___3dfx Voodoo____Cpu Series______Chipset______OS_____GraphicsDriver____User

12229_|__87401__|___16bit___|_V5 5500@190_|_QX6800@3.33_|_PT880P/U_|_WinME_|_Amigamerlin 2.9_|_ciacara




3DMark-2001Se 640x480
Score___CPU Score__Color Depth___3dfx Voodoo____Cpu Series______Chipset______OS_____GraphicsDriver____User




3DMark-2001Se 800x600
Score___CPU Score__Color Depth___3dfx Voodoo____Cpu Series______Chipset______OS_____GraphicsDriver____User




3DMark-2001Se 1024x768
Score___CPU Score__Color Depth___3dfx Voodoo____Cpu Series______Chipset______OS_____GraphicsDriver____User

_3171_|__00000__|___32bit___|_V5 5500@176_|__Q6600@2.30_|_PT880P/U_|_Win-7_|____SFFT-v1.6_____|_ciacara

_3045_|__00000__|___32bit___|_V5 5500@166_|__Q6600@2.30_|_PT880P/U_|_Win-7_|____SFFT-v1.6_____|_ciacara

_2672_|__00000__|___32bit___|_V5 5500@166_|__Q6600@2.30_|_PT880P/U_|_Win-7_|Amigamerlin3.1-R11-|_ciacara

_2668_|__00000__|___32bit___|_V5 5500@166_|__Q6600@2.30_|_PT880P/U_|_Win-7_|Amigamerlin3.1R11N|_ciacara

_2561_|__00000__|___32bit___|_V5 5500@166_|__Q6600@2.30_|_PT880P/U_|_Win-7_|____SFFT-v1.5_____|_ciacara



Siamo al 1° Posto! :app: :okduo: :king:





Citazione di: ciacara;175240...grazie davvero...:okduo:
Vi ringrazio tutti di Cuore!

E' passato più di un mese e non ho ancora postato il thread completo...scusatemi ma ho veramente poco tempo a disposizione...:wall:

Comunque mi farò perdonare! :)


Per mikepedo

Ho trovato già qualcosina per la tua mobo...vediamo se per il prossimo weekend riesco a postare qualcosa.

Ora parto e vado via di corsa... un saluto a tutti. ;)

Ciao.:)