Radeon HD4850: Vmod e Bios mod

Aperto da PhilAnselmo@Superjoint, 28 Luglio 2010, 17:16:54

Discussione precedente - Discussione successiva

0 Utenti e 1 Visitatore stanno visualizzando questa discussione.

PhilAnselmo@Superjoint

Ciao ragazzi!
Girovagando per forum, in cerca di possibili modifiche alla mia RadeonHD4850, ho trovato queste utili informazioni:
Possiedo questa scheda da più di un anno, e ultimamente stavo pensando di passare alla serie HD5xx0, non per le prestazioni, ma per i consumi, da quello che so la 4850 non è che sia proprio economica in bolletta :)

Messaggio dalla redazione:
Contenuto non disponibile in quanto rimosso da server esterno o server esterno off line


CitazioneThis voltmod applies to all HD 4850 series cards using PCB #B50131-00.

The HD 4850 supports very limited voltage control via BIOS or software, only up to 1.20V


Messaggio dalla redazione:
Contenuto non disponibile in quanto rimosso da server esterno o server esterno off line


GPU Voltage Mod (soldering)

Messaggio dalla redazione:
Contenuto non disponibile in quanto rimosso da server esterno o server esterno off line



GPU Voltage Mod (pencil)


Messaggio dalla redazione:
Contenuto non disponibile in quanto rimosso da server esterno o server esterno off line


This first voltage mod is easy to do but will not give you much more than about 1.4V on VDDC.[/B]

Messaggio dalla redazione:
Contenuto non disponibile in quanto rimosso da server esterno o server esterno off line



If you need more than 1.4V you should do above voltmod. Please note that  you have to paint on the PCB between the two solder dots. Since this is  more difficult we recommend the first pencil mod for smaller voltage  increases.
 

Memory Voltage Mod (soldering)

Messaggio dalla redazione:
Contenuto non disponibile in quanto rimosso da server esterno o server esterno off line



Memory Voltage Mod (pencil)


Messaggio dalla redazione:
Contenuto non disponibile in quanto rimosso da server esterno o server esterno off line




Fonte TechPowerUp

I have modded sapphire Bios, GPU Core upper limit to 850MHz, memory  upper limit to 1300MHz. You can download here. Try and Good luck!

I - HD4850 Bios (Modded by Leonarderman).

1. Sapphire HD4850 Hard Overclocked. DF Core 750MHz Mem 1100MHz Auto Cool Fan.
GPU Core upper Limit 850MHz
Memory Upper limit 1300MHz
Vcore Modded to 1.327V for higher Overclocking.


Sapphire HD4850 Hard Overclocked

2. Sapphire HD4850 Light Overclocked. DF Core 700MHz Mem 1000MHz Auto Cool Fan.
GPU Core upper Limit 850MHz
Memory Upper limit 1300MHz
Vcore DF 1.12V

Sapphire HD4850 light Overclocked

3. Asus HD4850 Light Overclocked. DF Core 700MHz Mem 1100MHz Auto Cool Fan.
GPU Core upper Limit 1200MHz
Memory Upper limit 1400MHz
Vcore DF 1.12V


Asus HD4850 Light Overclocked

4. Sapphire HD4850 Toxic. DF Core 675MHz Mem 1150MHz Auto Cool Fan.
GPU Core upper Limit 700MHz
Memory Upper limit 1200MHz
Vcore DF 1.12V

Sapphire HD4850 Toxic

You should create an USB Bootable to Dos. You can make it from the guide here:

http://www.thepcspy.com/read/bootable_usb_flash_drive

Then you have to copy ATIFlash programs 3.6 (download below) or newer (Dos) and Bios file to USB Disk. Try it done!

http://www.techpowerup.com/downloads...lash_3.60.html

Please note: Updating by ATIFlash 3.6 or newer (Dos), don't try to use  ATI WinFlash, because I found the problem from bios file maked by  RBE1.12!

PC1:E5200@3.6 - P5Q-SE - 2x2pc6400 - RadeonHD4850 - Seagate500gbSata2
PC2: AthlonXP2000+ - MSI KT3Ultra - 2X512HyperX - 3DFX Voodoo5 5500 - Maxtor60GB